- Blade Widths: 5'6" & 6'0"
- Fits: Mid Sized, Crossover & Sport UTVs
- Moldboard: Powder-Coated Steel
MID-DUTY UTV APPLICATIONS.
HEAVY-DUTY PERFORMANCE.
The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your mid-duty sport or recreational UTV without sacrificing performance. Packages available in either full hydraulic lift and angle or winch lift manual angle versions. The blade is available in two widths, 5’6″ or 6’0”—the 5’6″ blade widths are perfect for sidewalks and 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Fully hydraulic blade controls allow the operator to make the necessary blade adjustments quickly from inside the cab for fast and efficient winter cleanup.
Unique Features
Showing 6 out of 9
BLADE CONSTRUCTION
The IMPACT™; Mid-Duty straight blade snow plow features a 14-gauge powder coated steel moldboard that is 5’6″ or 6’0″ wide with a standard 5″ steel cutting edge.
STRUCTURAL REINFORCEMENT
With four vertical ribs and high-strength, low alloy steel construction, the mid-duty straight blade is strong enough for commercial operation yet light enough to fit most mid-duty UTVs.
SWAY-FRAME™ DESIGN
To ensure the blade stays aligned with the wheel track, the unique patent-pending Sway-Frame™ design allows the blade to shift side-to-side. This keeps the blade in the optimal position to maximize cleanup with each pass, preventing the UTV wheels from packing down missed snow.
LIGHTWEIGHT QUICK ATTACHMENT SYSTEM
The mounting system is easy to use and install. To make operation easier, the mounting system optimizes ground clearance when installed. Tough construction will allow it to withstand harsh conditions year-over-year.
TRIP PROTECTION
Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.
GROUND CLEARANCE
The removable receivers and low profile undercarriage provide exceptional ground clearance to maximize ramp angle, so your unit will be trail ready when the plow is not attached.
*Not applicable to some mounts
RELIABLE HYDRAULICS*
Full-hydraulic operation allows the operator to position the plow left, right, up, down, or float from inside the cab. This hydraulic system has been specifically designed to operate on mid-duty UTV plows, minimizing amperage draw and weight for seamless operation. Fully enclosed components are protected from the elements.
*Available for hydraulic models only.
WEATHERPROOF PLOW CONTROL*
The deluxe plow control is IP66-rated against moisture and offers hand-held or dash-mounted operation for added versatility. The weather-resistant control features large, durable switches which are easy to use—even with heavy gloves on.
*Available for hydraulic models only.
WINCH LIFT OPERATION*
The winch lift version comes with many of the features that the hydraulic lift version offers, including the unique Sway-Frame™ design and with two blade widths: 66 and 72 inches. The ultra-light winch system comes with a unique bail design to reduce side stress on the winch assembly equipped on the vehicle and provides a more vertical lift.
Angling the plow is as easy as unpinning an assembly, manually moving the blade to your desired point, and pinning it back in just a few seconds. The mounting system is easy to install and use, as it is identical to the powered version. Its design optimizes ground clearance and is built tough to withstand harsh winter environments year after year.
*Available for winch lift models only.
Standard Plow Features
ULTRAFINISH™ Baked On Powder Coat
The ULTRAFINISH™ baked on powder coat with epoxy primer is standard on all WESTERN® plows, providing outstanding protection against wear and rust.
WATCH VIDEO
Pre-Punched Blades for Accessories
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
Featured Accessories
HIGH-WEAR CUTTING EDGE
Increase wear resistance and restore your worn base angle to the proper geometry. This 3/8″ cutting edge fits the same hole pattern as the 1/4″ cutting edge that comes standard on your blade from the factory. Made of abrasion-resistant, high-carbon steel, the 3/8″ cutting edge gives your UTV plow extra wearability by increasing the surface area at the point of contact.
Part Number
#78516
For 5' 6" Model
#78517
For 6' Model
RUBBER DEFLECTORS
Control the snow and always see where you’re going with optional deflectors. The 2-ply rubber snow deflector custom fits the IMPACT™ UTV V-plow blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
Part Number
#91240
For 5' 6" Model
#84986
For 6' Model
POLY CUTTING EDGE
Protect decorative concrete, driveways and other delicate surfaces with these poly cutting edges. Made of resilient compounds that allow for longer life, these poly edges adjust to road surface irregularities without gouging and quickly remove all types of snow.
Part Number
#91210
For 5' 6" Model
#91215
For 6' Model
View All Accessories
Product Specs
Metric
| Models | 5'6" | 6'0" |
|---|---|---|
| Moldboard Options | High-Strength Steel | High-Strength Steel |
| Moldboard Options | High-Strength Steel | High-Strength Steel |
| Blade Type | Straight Blade | Straight Blade |
| Blade Type | Straight Blade | Straight Blade |
| Vehicle Compatibility | Mid Sized, Crossover & Sport UTVs | Mid Sized, Crossover & Sport UTVs |
| Vehicle Compatibility | Mid Sized, Crossover & Sport UTVs | Mid Sized, Crossover & Sport UTVs |
| Approx. Weight* (Without Mount) | Hydraulic: 190 lb Winch: 175 lb | Hydraulic: 195 lb Winch: 180 lb |
| Approx. Weight* (Without Mount) | Hydraulic: 86.2 kg Winch: 79.4 kg | Hydraulic: 88.5 kg Winch: 81.7 kg |
| Plowing Width (Full Angle) | 4'11" | 5'4" |
| Plowing Width (Full Angle) | 1.50 m | 1.63 m |
| Blade Width | 5'6" | 6'0" |
| Blade Width | 1.7 m | 1.8 m |
| Blade Height | 19.67" | 19.67" |
| Blade Height | 50 cm | 50 cm |
| Blade Thickness | 16 ga | 16 ga |
| Blade Thickness | 0.15 cm | 0.15 cm |
| Trip Springs | 2 | 2 |
| Trip Springs | 2 | 2 |
| Ribs | 4 | 4 |
| Ribs | 4 | 4 |
| Lift Cylinder** (Single Acting) | Hydraulic: 1.5" x 3" (one) Winch: N/A | Hydraulic: 1.5" x 3" (one) Winch: N/A |
| Lift Cylinder** (Single Acting) | Hydraulic: 3.8 cm x 7.6 cm Winch: N/A | Hydraulic: 3.8 cm x 7.6 cm Winch: N/A |
| Angling Rams** (Double Acting) | Hydraulic: 1.5" x 4" Winch: N/A | Hydraulic: 1.5" x 4" Winch: N/A |
| Angling Rams** (Double Acting) | Hydraulic: 3.8 cm x 10.2 cm Winch: N/A | Hydraulic: 3.8 cm x 10.2 cm Winch: N/A |
| Cutting Edge | ¼" x 4" | ¼" x 4" |
| Cutting Edge | 0.6 cm x 10.2 cm | 0.6 cm x 10.2 cm |
| Mount Type | Mid-Duty UTV Mounting System | Mid-Duty UTV Mounting System |
| Mount Type | Mid-Duty UTV Mounting System | Mid-Duty UTV Mounting System |
*Does not include vehicle mount weight. Please refer to the Quick Match program for specific vehicle applications.
**Lift Cylinder & Angling Ram only available for hydraulic models.
Compare Products
Product Literature
Quick Match
Does This Plow Fit My Vehicle?
Easily identify which WESTERN® snow plows will fit your vehicle, based on your vehicle's unique specifications.
Get Started
IMPACT™ Mid-Duty Photo Gallery
View Full Gallery
IMPACT™ Mid-Duty Video Gallery
View Full Gallery
